STATE OF NEVADA

Department of Business & Industry
Office of the Labor Commissioner

2002 PREVAILING WAGE RATES
     ESMERALDA COUNTY

DATE OF DETERMINATION: September 20, 2001

APPLICABLE FOR PUBLIC WORKS PROJECTS BID/AWARDED
OCTOBER 1, 2001 THROUGH SEPTEMBER 30, 2002

CARPENTER
In addition to CARPENTER rates add the applicable amounts  per hour, calculated based on a radius from Maryland Parkway and Charleston Boulevard, Las Vegas:
Zone 1-0 to 30 miles         0.00
Zone 2-30 to 50 miles       1.50
Zone 3-Over 50 miles        3.25

ELECTRICIAN-Line
In addition to ELECTRICIAN-Line rates  add the applicable amounts  per hour, calculated based on a radius from City Hall of  Las Vegas:
Zone 1-0 to 30 miles        0.00
Zone 2-30 to 60 miles      1.00
Zone 3-60 miles and over 3.00

LABORER
In addition to Laborer rates add the applicable amounts per hour, calculated based on a radius from City Hall of  Las Vegas:
Zone 1-0 to 30 Miles          0.00
Zone 2-30 to 50 Miles        1.50
Zone 3-50 to 70 Miles        2.50
Zone 4-Over 70 Miles        3.00
Laughlin Area                     2.25

MILLWRIGHT
In addition to MILLWRIGHT rates add the applicable amounts  per hour, calculated based on a radius from Maryland Parkway and Charleston Boulevard, Las Vegas:
Zone 1-0 to 20 miles         0.00
Zone 2-20 to 40 miles       1.50
Zone 3-40 miles and over  3.25

TILE/TERRAZZO WORKER/MARBLE MASON
In addition to TILE/TERRAZZO WORKER/MARBLE MASON rates add the applicable amounts  per hour, calculated based on a radius of over fifty (50) miles from the City Hall of Las Vegas, Nevada:
0-50 Miles                        Free Zone
51-70 Miles                      $18.00 per day
Over 70 Miles                   $38.00 per day

The area within the city limits of Boulder City and Primm, Nevada shall be considered free zones. 

TRUCK DRIVER
In addition to TRUCK DRIVER rates add the applicable amounts per hour, calculated from Las Vegas City Hall:
Zone 1-0 to 30 miles         0.00
Zone 2-30 to 50 miles       1.00
Zone 3-50 to 70 miles       2.00
Zone 4-70 to 80 miles       3.00
Zone 5-Over 80 Miles      3.50
Laughlin & Mesquite         3.00

Group 2
Asphalt raker, ironer, spreader, luteman
Buggymobile man
Cement dumper (on one yard or larger mixers & handling bulk cement)
Cesspool digger and installer
Chucktender (except tunnels)
Concrete core cutter
Concrete curer, impervious membrane and oiler of all materials
Concrete saw man, excluding tractor type, cutting, scoring old or new concrete
Gas and oil wrapper, pot tender and form man
Making and caulking of all non-metallic pipe joints
Operators and tenders of pneumatic and electric tools, vibrating machines, hand propelled trenching machines, impact wrench multiplate and similar mechanical tools not separately classified herein
Operator of cement grinding machine
Riprap stonepaver
Roto-scraper
Sandblaster (pot tender)
Scaler
Septic tank digger and installer (lead man)
Tank scaler and cleaner
Tree climber, faller, chain saw operator, Pittsburgh chipper and similar type brush shredders

Group 3
Cutting torch operator
Gas and oil pipeline wrapper
Gas and oil pipeline laborer, certified
Jackhammer and/or pavement breaker
Laying of all non-metallic pipe, including landscape sprinklers, sewer pipe, drain pipe and underground tile 
Mudcutter
Concrete vibrator operator, all sizes
Rock slinger
Scaler (using bos'n chair or safety belt or power tools)
Forklift (Incidental to Trade) – A journeyman shall hold OSHA certification at time of referral
Hodcarrier
Mason Tender

Group 4
Cribber or shorer, lagging, sheeting, trench bracing, hand guided lagging hammer
Head rock slinger
Powderman-blaster, all work of loading holes, placing and blasting of all powder and explosives of whatever type, regardless of method used for such  loading and placing
Sandblaster (nozzleman)
Steel header-board man

Group 5
Driller (core, diamond or wagon)
Joy driller model TW-M-2A, Gardner-Denver model DH 143 and similar type drills (in accordance with Memorandum of Understanding between Laborers and Operating Engineers dated Miami, Florida, February 3, 1954)
Gas and oil pipeline fusion
Gas and oil pipeline wrappers, 6" pipe and over

Group 6
Miner and Bullgang

Group 7
Asbestos Abatement
Lead Abatement
Hazardous Waste Abatement
Petro-Chemical Abatement
Radiation Remediation
Microbial Remediation

Group 2
Asphalt-Rubber Plant Operator (Nurse Tank Operator)
Concrete Mixer Operator - Skip type
Conveyor Operator
Fireman
Hydrostatic Pump Operator
Oiler Crusher (Asphalt or Concrete Plant)
Rotary Drill Helper (Oilfield)
Skiploader (wheel type up to ¾ yd. without attachment)
Soils Field Technician
Tar Pot Fireman
Temporary Heating Plant Operator
Trenching Machine Oiler

Group 3
Asphalt-Rubber Blend Operator
Equipment Greaser (rack)
Ford Ferguson (with dragtype attachments)
Helicopter Radioman (ground)
Stationary Pipe Wrapping and Cleaning Machine Operator

Group 4
Asphalt Plant Fireman
Backhoe Operator (Mini-Max or similar type)
Boring Machine Operator
Boxman or Mixerman (Asphalt or Concrete)
Building and/or Structure Inspector
Chip Spreading Machine Operator
Concrete Cleaning Decontamination Machine Operator
Concrete Pump Operator (small portable)
Drilling Machine Operator, Small Auger Types (Texoma Super
  Economatic, or similar types - Hughes 100 or 200, or similar
  types - drilling depth of 30' maximum)
Equipment Greaser (Grease Truck)
Guard Rail Post Driver Operator
Highline Cableway Signalman
Hydra-Hammer-Aero Stomper
Power Concrete Curing Machine Operator
Power Concrete Saw Operator
Power - Driven Jumbo Form Setter Operator
Power Sweeper Operator
Roller Operator (compacting)
Screed Operator (Asphalt or Concrete)
Trenching Machine Operator (up to 6 ft.)

Group 5
Equipment Greaser (Grease Truck/Multi-Shift)

Group 6
Asphalt Plant Engineer
Batch Plant Operator
Bit Sharpener
Concrete Joint Machine Operator (canal and similar type)
Concrete Planer Operator
Deck Engine Operator
Derrickman (Oilfield type)
Drilling Machine Operator, Bucket or Auger Types (Calweld 100
  Bucket or similar types - Watson 1000 Auger or similar types -
  Texoma 330, 500 or 600 Auger or similar types - drilling depth
  of 45' maximum)
Drilling Machine Operator (including water wells)
Hydrographic Seeder Machine Operator (straw, pulp or seed)
Jackson Track Maintainer, or similar type
Kalamazoo Switch Tamper, or similar type
Machine Tool Operator
Maginnis Internal Full Slab Vibrator
Mechanical Berm, curb or gutter (concrete or asphalt)
Mechanical Finisher Operator (concrete, Clary-Johnson-Bidwell or
  similar)
Pavement Breaker Operator (truck mounted, Oiler or Journeyman-
  trainee required)
Road Oil Mixing Machine Operator
Roller Operator (asphalt or finish)
Rubber-Tired Earth Moving Equipment (single engine, up to and
  including 25 yds. struck)
Self-Propelled Tar Pipelining Machine Operator
Skiploader Operator (crawler and wheel type, over ¾ yd. and up
  to and including 1½ yds.)
Slip Form Pump Operator (power driven hydraulic lifting device
  for concrete forms)
Tractor Operator - Bulldozer, Tamper-Scraper (single engine, up
  to 100 h.p. flywheel and similar types, up to and including
  D-5 and similar types)
Tugger Hoist Operator (1 drum)
Ultra High Pressure Waterjet Cutting Tool System Operator
Vacuum Blasting Machine Operator
Welder - General

Group 7
Welder - General (Multi-Shift)

Group 8
Asphalt or Concrete Spreading Operator (Tamping or Finishing)
Asphalt Paving Machine Operator (Barber Greene or similar type -
  1 Screedman required - if an additional Screedman is required,
  he shall be an employee covered by these provisions)
Asphalt-Rubber Distributor Operator
Backhoe Operator (up to and including ¾ yd.) Small Ford, Case
  or similar.
Cast in Place Pipe Laying Machine Operator
Combination Mixer and Compressor Operator (Gunite Work)
Compactor Operator - self propelled
Concrete Mixer Operator - Paving (Oiler or Journeyman-trainee
  required)
Crushing Plant Operator (Oiler or Journeyman-trainee required)
Drill Doctor
Drilling Machine Operator, Bucket or Auger Types (Calweld 150
  Bucket or similar types - Watson 1500, 2000, 2500 Auger or
  similar types - Texoma 700, 800 Auger or similar types -
  drilling depth of 60' maximum)
Elevating Grader Operator
Grade Checker
Gradall Operator (Oiler or Journeyman-trainee required)
Grouting Machine Operator
Heavy Duty Repairman
Heavy Equipment Robotics Operator
Kalamazoo Balliste Regulator or similar type
Kolman Belt Loader and similar type (additional employee required
  on two (2) or more)
Le Tourneau Blob Compactor or similar type
Loader Operator (Athey, Euclid, Sierra and similar types)
Master Environmental Maintenance Mechanic
Pneumatic Concrete Placing Machine Operator (Hackley-Presswell or
  similar type)
Pumpcrete Gun Operator
Rotary Drill Operator (excluding Caison type - Oiler or
  Journeyman-trainee required)
Rubber-Tired Earth Moving Equipment Operator (single engine,
  Caterpillar, Euclid, Athey Wagon, and similar types with any
  and all attachments over 25 yds. and up to and including
  50 cu. yds. struck)
Rubber-Tired Earth Moving Equipment Operator (multiple engine -
  up to and including 25 yds. struck)
Rubber-Tired Scraper Operator (self-loading paddle wheel type -
  John Deere, 1040 and similar single unit)
Self-Propelled Curb and Gutter Machine Operator
Skiploader Operator (crawler and wheel type over 1½ yds. up to
  and including 6½ yds.)
Soil Remediation Plant Operator (C.M.I. Enviro Tech Thermal or  Similar Types) (Oiler Required Group II)
Surface Heaters and Planer Operator
Tractor Compressor Drill Combination Operator
Tractor Operator (any type larger than D-5 - 100 flywheel h.p.
  and over, or similar -  Bulldozer, Tamper, Scraper and Push
  Tractor, single engine)
Tractor Operator (boom attachments)
Traveling Pipe Wrapping, Cleaning and Bending Machine Operator
Trenching Machine Operator (over 6 ft. depth capacity,
  manufacturer's rating - Oiler or Journeyman-trainee required)
Ultra High Pressure Waterjet Cutting Tool System Mechanic

Group 9
Heavy Duty Repairman (Multi-Shift)

Group 10
Drilling Machine Operator, Bucket or Auger Types (Calweld 200 B
  Bucket or similar types - Watson 3000 or 5000 Auger or similar
  types - Texoma 900 Auger or similar types - drilling depth of
  105' maximum)
Dual Drum Mixer (Oiler or Journeyman-trainee required)
Heavy Duty Repairman-Welder Combination
Monorail Locomotive Operator (diesel, gas or electric)
Motor Patrol - Blade Operator (single engine)
Multiple Engine Tractor Operator (Euclid and similar type -
  except Quad 9 Cat.)
Pre-Stressed Wrapping Machine Operator (2 Operators required)
Rubber-Tired Earth Moving Equipment Operator (single engine, over
  50 yds. struck)
Rubber-Tired Earth Moving Equipment Operator (multiple engine,
  Euclid, Caterpillar and similar - over 25 yds. and up to
  50 yds. struck)
Tower Crane Repairman
Tractor Loader Operator (crawler and wheel-type over 6½ yds.)
Welder-Certified
Woods Mixer Operator (and similar Pugmill equipment)

Group 11
Dynamic Compactor LDC350 (or similar types - two (2) Operators
  required)
Heavy Duty Repairman-Welder Combination (Multi-Shift)
Welder-Certified (Multi-Shift)

Group 12
Auto Grader Operator (Grade Checker and one (1) additional
  employee required)
Automatic Slip Form Operator (Grade Checker and one (1)
  additional employee required.)
Drilling Machine Operator, Bucket or Auger Types (Calweld, Auger
  200 CA or similar types - Watson, Auger 6000 or similar types-
  Hughes Super Duty, Auger 200 or similar types - drilling depth
  of 175' maximum)
Hoe Ram or similar with Compressor
Mass Excavator Operator - Less than 750 cu. yds. (two (2)
  Operators and Oiler or Journeyman-Trainee required)
Mechanical Finishing Machine Operator
Mobile Form Traveler Operator
Motor Patrol Operator (multi-engine)
Pipe Mobile Machine Operator (two (2) Operators required)
Rubber-Tired Earth Moving Equipment Operator (multiple engine,
  Euclid, Caterpillar and similar type, over 50 cu. yds. struck)
Rubber-Tired Self-Loading Scraper Operator (paddle-wheel-Auger
  type self-loading - two (2) or more units)
Vermeer Rock Trencher (or similar type)

Group 13
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Push-Pull System (single engine, up to and including
  25 yds. struck)

Group 14
Canal Liner Operator (not less than four (4) employees -
  Operator, Oiler, Welder, Mechanic, Grade Checker required)
Canal Trimmer Operator (Operator, Oiler, and two (2) other
  employees covered by these provisions  required)
Remote Controlled Earth Moving Equipment Operator (no one (1)
  Operator shall operate more than two (2) pieces of earth
  moving equipment at one time - One Dollar ($1.00) per hour
  additional to base rate)
Wheel Excavator Operator (over 750 cu. yds. per hour - two (2)
  Operators and one (1) Oiler or Journeyman-trainee, and two (2)
  Heavy Duty Repairmen required)

Group 15
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Push-Pull System (single engine, Caterpillar, Euclid,
  Athey Wagon, and similar types with any and all attachments
  over 25 yds. and up to and including 50 cu. yds. struck)
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Push-Pull System (multiple engine - up to and
  including 25 yds. struck)

Group 16
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Push-Pull System (single engine, over 50 yds. struck)
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Push-Pull System (multiple engine, Euclid,
  Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

Group 17
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Push-Pull System (multiple engine, Euclid,
  Caterpillar and similar type, over 50 cu. yds. struck)
Tandem Tractor Operator (operating crawler type tractors in
  tandem - Quad 9 and similar type)

Group 18
Rubber-Tired Earth Moving Equipment Operator, operating in Tandem
  (scrapers, belly dumps, and similar types in any combination,
  excluding compaction units - single engine, up to and
  including 25 yds. struck)

Group 19
Rotex Concrete Belt Operator (or similar types)
Rubber-Tired Earth Moving Equipment Operator, operating in Tandem
  (scrapers, belly dumps, and similar types in any combination,
  including compaction units - single engine, Caterpillar,
  Euclid, Athey Wagon, and similar types with any and all
  attachments over 25 yds. and up to and including 50 cu. yds.
  struck)

Rubber-Tired Earth Moving Equipment Operator, operating in Tandem
  (scrapers, belly dumps, and similar types in any combination,
  excluding compaction units - multiple engine, up to and
  including 25 yds. struck)

Group 20
Rubber-Tired Earth Moving Equipment Operator, operating in Tandem
  (scrapers, belly dumps, and similar types in any combination,
  excluding compaction units - single engine, over 50 yds. struck)
Rubber-Tired Earth Moving Equipment Operator, operating in Tandem
  (scrapers, belly dumps, and similar types in any combination,
  excluding compaction units - multiple engine, Euclid,
  Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

Group 21
Rubber-Tired Earth Moving Equipment Operator, operating in Tandem
  (scrapers, belly dumps, and similar types in any combination,
  excluding compaction units - multiple engine, Euclid,
  Caterpillar and similar type, over 50 cu. yds. struck)

Group 22
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Tandem Push-Pull System (single engine, up to and
  including 25 yds. struck)

Group 23
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Tandem Push-Pull System (single engine, Caterpillar,
  Euclid, Athey Wagon, and similar types with any and all
  attachments over 25 yds. and up to and including 50 cu. yds.
  struck)
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Tandem Push-Pull System (multiple engine, up to and
  including 25 yds. struck)

Group 24
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Tandem Push-Pull System (single engine, over 50 yds.
  struck)
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Tandem Push-Pull System (multiple engine, Euclid,
  Caterpillar and similar, over 25 yds. & up to 50 yds. struck)

Group 25
Concrete Pump Operator - truck mounted (Oiler required when boom
  over 105' or 36 meters)
Rubber-Tired Earth Moving Equipment Operator, operating equipment
  with the Tandem Push-Pull System (multiple engine, Euclid,
  Caterpillar and similar type, over 50 cu. yds. struck)
 
 

Group 2
Truck Crane Oiler

Group 3
A-Frame or Winch Truck Operator
Ross Carrier Operator (jobsite)

Group 4
Bridge-Type Unloader and Turntable Operator
Helicopter Hoist Operator

Group 5
Stinger Crane (Austin-Western or similar type)
Tugger Hoist Operator (1 drum)

Group 6
Bridge Crane Operator
Cretor Crane Operator (Oiler required)
Hoist Operator (Chicago Boom and similar type)
Lift Mobile Operator (Oiler required)
Lift Slab Machine Operator (Vagtborg and similar types)
Material Hoist Operator
Polar Gantry Crane Operator
Shovel, Backhoe, Dragline, Clamshell Operator (over ¾ yd. and
  up to 5 cu. yds. M.R.C., Oiler required)
Tugger Hoist Operator (2 drum)

Group 7
Pedestal Crane Operator
Shovel, Backhoe, Dragline, Clamshell Operator (over 5 cu. yds,
  M.R.C., Oiler required)
Tower Crane Repairman
Tugger Hoist Operator (3 drum)

Group 8
Crane Operator (up to and including 25 ton capacity, see Crew
  Size Requirement)
Crawler Transporter Operator
Derrick Barge Operator (up to and including 25 ton capacity, see
  Crew Size Requirement)
Hoist Operator, Stiff Legs, Guy Derrick or similar type (up to and
  including 25 ton capacity, see Crew Size Requirement)
Shovel, Backhoe, Dragline, Clamshell Operator (over 7 cu. yds,
  M.R.C., Oiler required)

Group 9
Crane Operator (over 25 tons, up to and including 50 ton M.R.C.,
  see Crew Size Requirement)
Derrick Barge Operator (over 25 tons, up to and including 50 ton
  M.R.C., see Crew Size Requirement)
Highline Cableway Operator
Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 25
  tons, up to and including 50 ton M.R.C., see Crew Size
  Requirement)
K-Crane
Polar Crane Operator

Group 10
Crane Operator (over 50 tons, up to and including 100 ton M.R.C.,
  Oiler required)
Derrick Barge Operator (over 50 tons, up to and including 100 ton
  M.R.C., see Crew Size Requirement)
Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 50
  tons, up to and including 100 ton M.R.C., see Crew Size
  Requirement)
Mobile Tower Crane Operator (over 50 tons, up to and including
  100 ton M.R.C., two (2) Operators required)
Tower Crane Operator and Tower Gantry (see Crew Size Requirement)

Group 11
Crane Operator (over 100 tons, up to and including 200 ton
  M.R.C., Oiler required)
Derrick Barge Operator (over 100 tons, up to and including 200
  ton M.R.C., see Crew Size Requirement)
Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 100
  tons, up to and including 200 ton M.R.C., see Crew Size
  Requirement)
Mobile Tower Crane Operator (over 100 tons, up to and including
  200 ton M.R.C., two (2) Operators required)

Group 12
Crane Operator (over 200 tons, up to and including 300 ton
  M.R.C., Oiler required)
Derrick Barge Operator (over 200 tons, up to and including 300
  ton M.R.C., see Crew Size Requirement)
Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 200
  tons, up to and including 300 ton M.R.C., see Crew Size
  Requirement)
Mobile Tower Crane Operator (over 200 tons, up to and including
  300 ton M.R.C., two (2) Operators required)

Group 13
Crane Operator (over 300 tons, two (2) Operators required)
Derrick Barge Operator (over 300 tons, see Crew Size Requirement)
Helicopter Pilot
Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 300
  tons, see Crew Size Requirement)
Mobile Tower Crane Operator (over 300 tons, two (2) Operators
  required)

Group 1
Chainman

Group 2
Rodman

Group 3
Instrumentman

Group 4
Hydrographic Engineering Technician I (Chainman)

Group 5
Party Chief

Group 6
E.D.M. or Fathometer Instrumentman

Group 7
Certified Party Chief

Group 8
Hydrographic Engineer Party Chief

Group 9
Certified Hydrographic Engineer Party Chief

Group 10
Chief of Parties
Two (2) or more crews

Group 2
Skiploader (wheel type up to ¾ yd. without attachment)

Group 3
Chainman
Power - Driver Jumbo Form Setter Operator

Group 4
Dinkey Locomotive or Motorman (up to and including 10 tons)
Rodman

Group 5
Bit Sharpener
Equipment Greaser (Grease Truck)
Instrumentman
Slip Form Pump Operator (power driven hydraulic lifting device
  for concrete forms)
Tugger Hoist Operator (1 drum)
Tunnel Locomotive Operator (over 10 and up to and including 30
  tons)
Welder - General

Group 6
Backhoe Operator (up to and including ¾ yd.) Small Ford, Case
  or similar
Drill Doctor
Grouting Machine Operator
Heading Shield Operator
Heavy Duty Repairman
Loader Operator (Athey, Euclid, Sierra and similar types)
Mucking Machine Operator (¼ yd. - Oiler or Journeyman-trainee
  required - rubber-tired, rail or track type)
Pneumatic Concrete Placing Machine Operator (Hackley-Presswell or
  similar type)
Pneumatic Heading Shield (tunnel)
Pumpcrete Gun Operator
Tractor Compressor Drill Combination Operator
Tugger Hoist Operator (2 drum)
Tunnel Locomotive Operator (over 30 tons)

Group 7
Heavy Duty Repairman-Welder Combination

Group 8
Party Chief

Group 9
Certified Chief of Party
Tunnel Mole Boring Machine Operator

Group 1
Drivers of dump trucks (less than 12 yds. water level), drivers of trucks (legal payload capacity less than 15 tons), water and fuel truck drivers under 2,500 gal, pickup driver, service station attendant, service truck driver, teamster equipment (highest rate paid for dual craft operation), warehousemen, drivers of busses on site used for transportation of up to twenty-five (25) passengers, working flat rack driver.

Group 2
Drivers of dump trucks (12 yds but less than 16 yds water level), drivers of trucks (legal payload capacity between 15 and 20 tons), drivers of transit mix trucks (under 3 yds), dumpcrete trucks (less than 6 ½ yds water level), gas and oil pipeline working truck drivers, including winch truck and all sizes of trucks, water and fuel truck drivers (2,500 gal to 4,000 gal), truck greaser, drivers of busses (on jobsite used for transportation or more than twenty-five (25) passengers), warehouse clerk

Group 3
Drivers of dump trucks (16 yds up to and including 22 yds water level), drivers of trucks (legal payload cap. 20 tons but less than 30 tons), drivers of dumpster trucks, drivers of transit-mix trucks (3 yds but less than 6 yds), dumpcrete trucks (6 ½ yds water level and over), fork lift driver, Ross Carrier driver, highway water and fuel drivers (4,000 gal but less than 6,000 gal), stock room clerk, tireman

Group 4
Drivers of transit-mix trucks (6 yds or more), drivers of dump trucks (over 22 yds. water level), drivers of trucks (legal payload capacity 30 tons and over) drivers of fuel and water trucks (6,000 gal and over)

Group 5
Drivers of trucks and trailers in combination (seven axles or more)

Group 6
All Offroad Equipment, Truck Repairman, and Drivers of Road Oil Spreader Trucks

DW 10 and DW 20 Euclid-type equipment Letourneau pulls, Terra Cobras and similar types of equipment, also PB and similar type trucks performing work within the Teamster jurisdiction, regardless of types of attachment, including power units pulling off-highway belly dumps in tandem

All off-road equipment for the purposes of these provisions, shall mean any equipment or combination of unladen equipment which cannot be licensed for normal or regular highway use because of width, height or length limitations when measuring the equipment or combination as it is being operated.